ABB CRB 15000 Product Manual page 252

5 Repair
5.4.1 Replacing the lower arm
Continued
3
4
5
6
Continues on next page
252
Action
Lift the lower arm to mounting position and slide
it onto the guide pins.
Secure the lower arm to the swing with all attach-
ment screws but two.
Pre-tighten the screws crosswise firstly.
Remove the guide pins and fasten the remaining
two screws.
Torque tighten all screws crosswise.
© Copyright 2021 ABB. All rights reserved.
Note
xx2000001952
Hex socket head cap flange screw:
M4x25 (16 pcs)
xx2000001940
Hex socket head cap flange screw:
M4x25 (16 pcs)
xx2000001951
Tightening torque: 4.6 Nm.
Product manual - CRB 15000
3HAC077389-001 Revision: A