ABB CRB 15000 Product Manual page 211

2
Concluding procedure
1
Product manual - CRB 15000
3HAC077389-001 Revision: A
Action
Refit the cover with new attachment screws.
Action
DANGER
Make sure all safety requirements are met when
performing the first test run.
© Copyright 2021 ABB. All rights reserved.
5.3.6 Replacing the axis-5 cabling
Note
Hex socket head cap flange screw
with glue: 3HAB3413-312
M3x12
For tubular cover.
Always use new screws.
If ordering a new axis-4 or axis-5
joint unit spare part, new screws
for the tubular cover are included.
Tightening torque: 1.6 Nm.
xx2000002123
Note
5 Repair
Continued
211