ABB CRB 15000 Product Manual page 194

5 Repair
5.3.6 Replacing the axis-5 cabling
Continued
Required spare parts
Spare part
Cable harness, joint 5
Cable tie
Required tools and equipment
Equipment
Tweezers
Protection plate
Cable tie gun EVO7
Standard toolkit
Required consumables
Consumable
Cable ties
O-ring
O-ring
O-ring
Grease
Hex socket head cap flange screw
with glue
Continues on next page
194
Note
The spare part numbers that are listed in the table can be out of date. See the
latest spare parts of the CRB 15000 via myABB Business Portal,
www.abb.com/myABB.
© Copyright 2021 ABB. All rights reserved.
Article number Note
3HAC073206-001 Also order new Cable tie:
3HAC075545-001.
3HAC075545-001 For securing joint unit cable.
Article number Note
- Used to handle drive board con-
nectors.
3HAC077790-001 For protection of drive board
during cabling installation on joint
unit.
- HellermannTyton 110-70084 or
similar
- Content is defined in section
Standard toolkit on page
Article number Note
-
3HAC061327-051 Axis-5 cover
Replace if damaged.
3HAC061327-051 Axis-4 cover
Replace if damaged.
3HAC061327-043 Tubular cover
Replace if damaged.
3HAC042536-001 Shell Gadus S2
3HAB3413-312 M3x12
For tubular cover.
Always use new screws.
If ordering a new axis-4 or axis-5
joint unit spare part, new screws
for the tubular cover are included.
625.
Product manual - CRB 15000
3HAC077389-001 Revision: A