ABB CRB 15000 Product Manual page 286

5 Repair
5.4.3 Replacing the tubular
Continued
Required spare parts
Spare part
Tubular
Hex socket head cap flange screw
with glue
Hex socket head cap flange screw
with glue
Cable tie
Required tools and equipment
Equipment
Tweezers
Lifting aid
Guide pin, M3x110
Standard toolkit
Required consumables
Consumable
Cleaning agent
Flange sealant
Cable ties
O-ring
Continues on next page
286
4 Remove the tilt.
5 Replace the tubular.
Note
The spare part numbers that are listed in the table can be out of date. See the
latest spare parts of the CRB 15000 via myABB Business Portal,
www.abb.com/myABB.
© Copyright 2021 ABB. All rights reserved.
Article number Note
3HAC074509-001 Also order new attachment
screws for the axis-4 joint unit:
3HAB3413-330 (12 pcs).
3HAB3413-312 M3x12
For tubular cover.
Always use new screws.
If ordering a new axis-4 or axis-5
joint unit spare part, new screws
for the tubular cover are included.
3HAB3413-330 M3x30, 12 pcs
Always use new screws when re-
fitting a joint unit. If ordering a
new joint unit spare part, new
screws are included.
3HAC075545-001 For securing joint unit cable.
Article number Note
- Used to handle drive board con-
nectors.
3HAC077789-001 For joint units on axes 4, 5 and 6.
Attachment screws M3x12 (4 pcs)
are enclosed.
3HAC077787-001 Always use guide pins in pairs.
For joint units on axes 4, 5 and 6.
- Content is defined in section
Standard toolkit on page
Article number Note
- Isopropanol
- Loctite 574
-
3HAC061327-043 Tubular cover
Replace if damaged.
625.
Product manual - CRB 15000
3HAC077389-001 Revision: A