ABB CRB 15000 Product Manual page 595

6
7
Product manual - CRB 15000
3HAC077389-001 Revision: A
Action
Insert the cabling through the cable support and
fit the support to the drive board with the attach-
ment screws.
Align the triangle direction mark on the cable
support and the white mark on the cable harness.
Use the cable tie to pre-fix the cable by hand.
© Copyright 2021 ABB. All rights reserved.
5.6.6 Replacing the axis-6 joint unit
Note
xx2000002056
Hex socket head cap screw: M3x30
12.9 Gleitmo 603+Geomet 500 (2
pcs)
Tightening torque: 0.45 Nm.
xx2000002055
xx2100000507
xx2100000508
Continues on next page
5 Repair
Continued
595