ABB CRB 15000 Product Manual page 197

2
3
4
5
Product manual - CRB 15000
3HAC077389-001 Revision: A
Action
Remove the functional and protective earth cables
by removing the screw.
Snap loose and disconnect the connectors:
• J4/5.DC+
• J4/5.DC-
• J4/5.CS
• J4/5.CP
Disconnect the connectors that belongs to the
axis-5 cabling, from the axis-4 drive board:
• D3/4.X2
• D3/4.DC-
• D3/4.DC+
Use tweezers, if needed.
Pull out the cabling carefully from the tubular.
© Copyright 2021 ABB. All rights reserved.
5.3.6 Replacing the axis-5 cabling
Note
xx2000002087
xx2000002089
Tweezers
xx2000002125
xx2000002126
Continues on next page
5 Repair
Continued
197