ABB CRB 15000 Product Manual page 243

2
3
4
Concluding procedure
1
Product manual - CRB 15000
3HAC077389-001 Revision: A
Action
Place the cover at mounting position and recon-
nect the brake release connector DR.X8 to the
drive board.
Orient the cover for proper arrangement of the
brake release cable.
Secure the brake release cable with a cable tie.
Refit the cover with the four screws.
Action
DANGER
Make sure all safety requirements are met when
performing the first test run.
© Copyright 2021 ABB. All rights reserved.
5.3.9 Replacing the brake release unit
Note
xx2000001932
Cable ties
xx2000001931
Hex socket head cap screw: M3x30
12.9 Gleitmo 603+Geomet 500 (4
pcs)
Tightening torque: 0.45 Nm
xx2000001935
Note
5 Repair
Continued
243