5 Repair
5.3.5 Replacing the axis-4 cabling
Continued
8
9
Continues on next page
184
Action
Fit the protection plate to the drive board unit.
Secure the cables to the cable support with a
cable tie, using a cable tie gun.
Assembly direction for the cable tie is shown in
the figure.
© Copyright 2021 ABB. All rights reserved.
Note
Protection plate: 3HAC077790-001
xx2000002057
Cable tie: 3HAC075545-001. For
securing joint unit cable.
Cable tie gun EVO7
Settiing for cable tie gun: 6.75.
xx2000002058
xx2000002059
Product manual - CRB 15000
3HAC077389-001 Revision: A