ABB CRB 15000 Product Manual page 294

5 Repair
5.4.3 Replacing the tubular
Continued
Removing the tubular cover
1
Separating the cabling between the tubular and the tilt
1
2
3
Continues on next page
294
Action
Remove the cover by removing the six screws.
Dispose the screws. New screws must be used
when refitting the cover.
New screws are included in the spare part delivery
of the joint unit.
Action
Cut the cable ties, if needed.
Remove the functional and protective earth cables
by removing the screw.
Snap loose and disconnect the connectors:
• J4/5.DC+
• J4/5.DC-
• J4/5.CS
• J4/5.CP
© Copyright 2021 ABB. All rights reserved.
Note
xx2000002123
Note
xx2000002124
xx2000002086
xx2000002087
xx2000002089
Product manual - CRB 15000
3HAC077389-001 Revision: A