ABB CRB 15000 Product Manual page 168

5 Repair
5.3.4 Replacing the axis-3 cabling
Continued
2
3
4
Continues on next page
168
Action
Place the cover at mounting position and recon-
nect the brake release connector DR.X8 to the
drive board.
Orient the cover for proper arrangement of the
brake release cable.
Secure the brake release cable with a cable tie.
Refit the cover with the four screws.
© Copyright 2021 ABB. All rights reserved.
Note
xx2000002023
Cable ties
xx2000002022
Hex socket head cap screw: M3x30
12.9 Gleitmo 603+Geomet 500 (4
pcs)
Tightening torque: 0.45 Nm
xx2000002021
Product manual - CRB 15000
3HAC077389-001 Revision: A