Section 13 LCD Controller/Driver
13.3.6
Boosting the LCD Drive Power Supply
When a large panel is driven, the on-chip power supply capacity may be insufficient. In this case,
the power supply impedance must be reduced. This can be done by connecting bypass capacitors
of around 0.1 to 0.3 µF to pins V
externally.
V
CC
This LSI
V
Figure 13.17 Connection of External Split-Resistance
Rev. 6.00 Aug 04, 2006 page 458 of 680
REJ09B0145-0600
to V
, as shown in figure 13.17, or by adding a split-resistance
1
3
V
0
V
1
V
2
V
3
SS
R = several kΩ to
R
several MΩ
R
R
C= 0.1 to 0.3µF