Renesas H8/3847R Series Hardware Manual page 428

8-bit single-chip microcomputer super low power

Table of Contents

Section 10 Serial Communication Interface

c. Data transfer operations

• SCI3 initialization

Data transfer on SCI3 first of all requires that SCI3 be initialized as described in "SCI

initialization" under 10.3.3, 2. c. Data transfer operations, and shown in figure 10.10.

• Transmitting

Figure 10.16 shows an example of a flowchart for data transmission. This procedure should be

followed for data transmission after initializing SCI3.

Rev. 6.00 Aug 04, 2006 page 390 of 680

REJ09B0145-0600