Renesas H8/3847R Series Hardware Manual page 69

8-bit single-chip microcomputer super low power

Table of Contents

* These values show the coordinates of the centers of pads. The accuracy is ±5 µm. The

home-point position is the chip's center and the center is located at half the distance

between the upper and lower pads and left and right pads. Pad numbers 11, 33, and

100 are power supply (V

Pad number 14 (TEST) must be connected to the Vss position. The device will not

operate properly if the pads are not connected as indicated.

) pads and must be connected. They should not be left open.

Coordinates*

Rev. 6.00 Aug 04, 2006 page 31 of 680

Section 1 Overview

REJ09B0145-0600