Related Manuals for Renesas H8/38099
Summary of Contents for Renesas H8/38099
-
Page 1: Quick Start
Quick Start Application Board Interface LCD module connector Application Board Interface Renesas Starter Kit for H8/38099 LCD module E8a header Reset switch Analog adjust User switches E8a emulator User LEDs D007574_11_S01_V01... -
Page 2: Installation
High-performance Embedded Workshop manual installed on your computer (Start Menu > All Programs > Renesas > High-performance Embedded Workshop > Manual Navigator). 19. Launch High-performance Embedded Workshop from the Start Menu. (Start Menu > All Programs > Renesas > High-performance Embedded Workshop > High-performance Embedded Workshop) 20. - Page 3 34. The first time the E8a is used a warning message box “Please choose driver” will be shown. Click <Ok>. Otherwise skip to step 38. 35. The “Driver Details” dialog will be shown. Select “Renesas Communications”. 36. After a short delay while the hardware is interrogated, select “USB Interface”. The channel number will vary.
- Page 4 39. Enter the clock speed (“10.00MHz” for the RSKH838099) then click <OK>. 40. Enter the ID Code (“0E8A” for the RSKH838099) then click <OK>. The connection to the Renesas Starter Kit will be completed and will activate the debugger buttons on the High-performance Embedded Workshop toolbar.
- Page 5 6. Renesas H8 Compiler The version of the compiler provided with this Renesas Starter Kit is fully functional but time limited. You have 60 days to evaluate the full product before the compiler will limit the code linker to 64k bytes. Full licensed H8 compiler versions are available from your Renesas supplier.