Renesas H8/3847R Series Hardware Manual page 64

8-bit single-chip microcomputer super low power

Table of Contents

Section 1 Overview

* These values show the coordinates of the centers of pads. The accuracy is ±5 µm. The

home-point position is the chip's center and the center is located at half the distance

between the upper and lower pads and left and right pads. Pad numbers 11, 12, and 34

are power supply (Vss) pads and must be connected. They should not be left open. Pad

number 15 (TEST) must be connected to the Vss position. The device will not operate

properly if the pads are not connected as indicated.

Rev. 6.00 Aug 04, 2006 page 26 of 680

REJ09B0145-0600

Coordinates*