Display Cluster Current-Topology - H3C s3100 series Command Manual

Parameters
None
Description
Use the display cluster black-list command to display the information of devices in the current cluster
blacklist.
Related commands: black-list.
Examples
# Display the contents of the current cluster blacklist.
<aaa_0.Sysname> display cluster black-list
Device ID
000f-e200-5502
00e0-fd34-bc66
Table 2-11 Description on the fields of the display cluster black-list command
Device ID
Access Device ID
Access port

display cluster current-topology

Syntax
display cluster current-topology [ mac-address mac-address1 [ to-mac-address mac-address2 ] |
member-id member-id1 [ to-member-id member-id2 ] ]
View
Any view
Parameters
mac-address mac-address1: Displays the topology structure three layers above or below the node
specified by the MAC address. If to-mac-address is specified, mac-address1 is the start point of the
route in the specified route topology displayed.
to-mac-address mac-address2: Displays the topology structure of the route from mac-address1 to
mac-address2.
member-id member-id1: Displays the structure of the standard topology three layers above or below
the node specified by the member ID. If to-member-id is specified, member-id1 is the start point of the
route in the specified route topology displayed.
to-member-id member-id2: Displays the topology structure of the route from member-id1 to
member-id2.
Access Device ID
000f-e202-2180
000f-e202-2180
Field
2-42
Access port
Ethernet1/0/24
Ethernet1/0/1
Description
ID of the device in the blacklist, expressed by the
MAC address of the device
ID of the device (in the cluster) that is connected
with a device in the blacklist, expressed by the
MAC address of the device
Port (in the cluster) that is connected with a
device in the blacklist