Display Power - H3C S7500 Series Command Manual

Command Manual – System Maintenance and Debugging
H3C S7500 Series Ethernet Switches
Table 3-3 Description on the fields of the display memory command
System Total Memory(bytes)
Total Used Memory(bytes)
Used Rate
# Display the current configuration information of the switch.
<H3C> display memory limit
Current memory limit configuration information:
system memory safety: 40 (MBytes)
system memory limit: 30 (MBytes)
auto-establish enabled
Free Memory: 108120672 (Bytes)
The state information about connection:
The times of disconnect: 0
The times of reconnect: 0
The current state: Normal

3.1.11 display power

Syntax
display power [ power-id ]
View
Any view
Parameters
power-id: Power ID.
Description
Use the display power command to view the state of the power supply of the switch.
Examples
# Display the state of the power supply.
<H3C> display power
Power
Power
Power
Field
1 State: Absent
2 State: Normal
3 State: Absent
Chapter 3 Device Management Commands
Description
Total memory size of the system, in unit of bytes
Used memory size of the system, in unit of bytes
Percentage of the used memory
3-8