Chapter 2 Vlan Configuration; Vlan Configuration; Basic Vlan Configuration; Basic Vlan Interface Configuration - H3C S3100-52P Operation Manual

Operation Manual – VLAN
H3C S3100-52P Ethernet Switch

Chapter 2 VLAN Configuration

2.1 VLAN Configuration

2.1.1 Basic VLAN Configuration

Table 2-1 Basic VLAN configuration
Operation
Enter system view
Create
VLANs in batch
Create a VLAN and
enter VLAN view
Assign a name for
the current VLAN
Specify
description string of
the current VLAN
Caution:
When you use the vlan command to create VLANs, if the destination VLAN is an
existing dynamic VLAN, it will be transformed into a static VLAN and the switch will
output the prompt information.

2.1.2 Basic VLAN Interface Configuration

I. Configuration prerequisites
Create a VLAN before configuring a VLAN interface.
Command
system-view
multiple vlan { vlan-id1 to vlan-id2 |
all }
vlan vlan-id
name text
the
description text
—
Optional
Required
The vlan-id argument ranges
from 1 to 4,094.
Optional
By default, the name of a VLAN
is its VLAN ID.
Optional
By default, the description string
of a VLAN is its VLAN ID.
2-1
Chapter 2 VLAN Configuration
Description