Removal Of The Exhaust Gas Flange; Removal Of The Carburetor Socket And Valve Fitting - Rotax 125 MAX DD2 Repair Manual

Removal of the exhaust gas flange

➩ Free the flange (Item 1) at the 2 Allen screws
(Item 2) from the cylinder (Item 3) and remove
the gasket (Item 4).
◆ Note:
A leaking connection between the
outlet port and the exhaust system
leads to a loss of performance.
Removal of the carburetor socket and valve
fitting
➩ Free the carburetor socket (Item 1) with the
screw hose clamp (Item 3) from the cylinder
(Item 2) by removing the 5 screws (Item 6).
➩ Remove the valve fitting (Item 4) and gasket
(Item 5) from the cylinder.
✔ Inspect the rubber parts for porosity.
✔ Check the reed valve (Item 8) for secure seating.
✔ Check the reed valve (Item.7) for damage and
cracks.
Page 18
Repair Manual 125 MAX DD2
Fig. 16
Fig. 17
Issue 01/2006