Setting Ladder Data Storage Location; Reading Comment Files From Data Storage (Supported By The Sequence Program Monitor (Ladder) Only) - Mitsubishi Electric GOT2000 Series User Manual

4.3.1

Setting ladder data storage location

■1. Setting ladder data storage location
Up to 512 files of ladder data (sequence programs and device comments) used for the sequence program monitor
(Ladder) or the sequence program monitor (R ladder) can be stored in a selected drive.
Only the A drive (standard SD card) or B drive (USB drive) is available for storing ladder data.
For the ladder data storage destination setting, refer to the following.
When setting with GOT utility
➠ GOT2000 Series User's Manual (Utility)
When setting with GT Designer3 (GOT2000)
➠
GT Designer3 (GOT2000) Screen Design Manual
4.3.2 Reading comment files from data storage (Supported by the sequence
program monitor (ladder) only)
The Sequence program monitor (Ladder or R ladder) uses comment files that are stored in the data storage (such as SD
card and USB memory) installed to the GOT.
■1. Procedure for using comment files stored in data storage
The following shows the procedure for using a comment file stored in a data storage.
(1) When displaying comments in language set for language switching of GOT utility
Store comment files in a data storage on the PLC read screen.
For how to store comment files in a data storage on the PLC read screen, refer to the following.
➠
4.5 How to Operate PLC Read Screen
POINT POINT POINT
(1) Changing screens when using the One-touch Ladder Jump function
For changing screens when using the One-touch Ladder Jump function, refer to the
following.
➠
4.2.4 ■1. Start operation when using the One-touch Ladder Jump function
(2) Changing screens when setting the security
For changing screens when setting the security, refer to the following.
➠ 4.3.4 Setting the security
4.3 Display Operation
4
4 - 15