Download  Print this page

Connection By General-purpose Communication - Mitsubishi Electric F940 Hardware Manual

Graphic operation terminal f940.
Hide thumbs

Advertisement

F940GOT-SWD-E/LWD-E
2.11

Connection by general-purpose communication

The GOT can be connected to a general controller such as micro computer board.
(The connected controller is hereafter referred to as "host (unit)".)
• Outline
In genera-purpose communication, the host unit is connected to the GOT via the RS-232C
and functions as the parent station in communication. Inside the GOT, there is a data area
to hold word data and bit data. The host unit can read and write the data area using com-
munication commands.
The contents of display and control in the GOT are determined by the screen data created
using the screen creation software in the personal computer. The screen data specifies the
layout of objects displayed on the screen, and specifies actions to be performed by pressing
of touch keys.
The GOT is equipped with the function to display the word data in the form of numbers and
bar graphs, the function to access the data for changing the status of the bit data using
switches, etc.
The target of access is the data area inside the GOT. The data location to be accessed is
specified by the screen data.
Installation, Wiring and General Specifications 2.
2-35

Advertisement

Table of Contents

   Related Manuals for Mitsubishi Electric F940

   Related Content for Mitsubishi Electric F940

This manual is also suitable for:

F940got-lwd-eF940got-swd-e

Comments to this Manuals

Symbols: 0
Latest comments:
  • sgarber Mar 19, 2015 12:28:
    I cannot seem to use the new controller​. It does not accept new sizes or in Fractions. The majority of our cutting is in fractions. I need some help with this.