Accessing By Gx Logviewer - Mitsubishi Electric GT16 User Manual

6.
Double-click [GOT] of the PLC side I/F to display
[PLC side I/F Detailed Setting of GOT].
7.
Set the IP address and port No. in [Ethernet detail
setting for PC and GOT connection].
Set the IP address and port No. to the same as the
Ethernet download setting.
31.5.1 Setting communication interface
8.
Check-mark [C24] in [PLC side I/F Detailed Setting of
GOT].
9.
The screen returns to [Transfer Setup]. Click
to check if GX Works2 has been
Connection Test
connected to the QCPU (Q mode).

31.6.5 Accessing by GX LogViewer

The following shows the procedure to set the FA
transparent function of GX LogViewer.
1.
Click [Show Assistant Dialog] for [View] on GX
LogViewer.
2.
The [Assistant] dialog box is displayed.
3.
Click [LCPU] [Show Logged Device Status] in the
[Assistant] dialog box.
4.
The [Transfer Setup Connection 1] dialog box is
displayed.
5.
Set the [Transfer Setup]:
PC side I/F :Serial USB
PLC side I/F : GOT
Other Station Setting : (Select from the system configuration)
6.
For [PC side I/F Serial Setting] and
[PLC side I/F Detailed Setting of GOT] of [Transfer
Setup],
refer to the following.
31.6.4 Accessing by GX Works2
31. FA TRANSPARENT FUNCTION
31.6 Personal Computer Side Setting
28
29
30
31
32
33
34
35
31 - 49