23.6.5 Accessing by GX LogViewer
The following shows the procedure to set the FA
transparent function of GX LogViewer.
1.
Click [Show Assistant Dialog] for [View] on GX
LogViewer.
2.
The [Assistant] dialog box is displayed.
3.
Click [LCPU]
[Show Logged Device Status] in the
[Assistant] dialog box.
4.
The [Transfer Setup Connection 1] dialog box is
displayed.
5.
Set the [Transfer Setup Connection 1]:
PC side I/F
PLC side I/F
Other Station Setting
6.
For [PC side I/F Serial Setting] and [PLC side I/F
Detailed Setting of GOT] of [Transfer Setup], refer to
the following.
23.6.4 Accessing by GX Works2
: Serial USB
: GOT
: (Select from the system
configuration)
23.6.6 Accessing PLC by
GX Configurator-QP
The following shows the procedure to set the FA
transparent function of GX Configurator-QP.
1.
Click [Connection setup] for [Online] on GX
Configurator-QP.
2.
The [Connection setup] is displayed.
3.
Set the [PC side] in [Connection setup].
When connecting the GOT and PC with serial
Interface: (RS-232C)
COM setting: COM1 to COM10
Transmission speed: 9.6kbps to 115.2kbps
When connecting the GOT and PC with USB
Interface: USB
23. FA TRANSPARENT FUNCTION
23.6 Personal Computer Side Setting
17
18
19
20
21
22
23
23 - 67