Table of Contents
Advertisement
L
A
C
INK
GGREGATION
OMMANDS
-
-
LACP GLOBAL
PASSIVE
MODE ENABLE
lacp global-passive-mode enable
Overview
Use this command to enable LACP channel-groups to dynamically self-configure
when they are connected to another device that has LACP channel-groups
configured with Active Mode.
lacp global-passive-mode enable
Syntax
no lacp global-passive-mode enable
Default
Enabled
Mode
Global Configuration
Usage notes
Do not mix LACP configurations (manual and dynamic). When LACP global passive
mode is turned on (by using the lacp global-passive-mode enable command),
we do not recommend using a mixed configuration in a LACP channel-group; i.e.
some links are manually configured (by the channel-group command) and others
are dynamically learned in the same channel-group.
Example
To enable global passive mode for LACP channel groups, use the command:
awplus(config)#
To disable global passive mode for LACP channel groups, use the command:
awplus(config)#
Related
show etherchannel
commands
show etherchannel detail
C613-50644-01 Rev B
lacp global-passive-mode enable
no lacp global-passive-mode enable
Command Reference for IE220 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
740
Advertisement
Table of Contents
