Plc Side Setting - Mitsubishi GOT1000 Series Connection Manual

COMPUTER LINK
CONNECTION
4.1 System Configuration . . . . . . . . . . page 4-2
This section describes the equipment and cables needed
for computer link connection.
Select a system suitable for your application.
4.2 Connection Cable . . . . . . . . . . . . page 4-17
This section describes the specifications of the cables
needed for establishing a computer link connection.
Check the specifications of the connection cables.
4.3 Preparatory Procedures for Monitoring . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . page 4-23
This section provides the procedures to be followed before
performing monitoring in computer link connection.
The procedures are written on the step-by-step basis so
that even a novice GOT user can follow them to start
communications.
4.4 PLC Side Setting . . . . . . . . . . . . . page 4-39
The PLC side settings for GOT connection are explained.
When checking the PLC side settings, refer to this section.
4
1
2
3
4
5
6
7
8
4 - 1