Setting Communication Interface (Communication Settings) - Mitsubishi GOT1000 Series Connection Manual

3.3.3

Setting communication interface (Communication settings)

Make the GOT communication interface settings on [Communication setting] of GT Designer2.
Select the same communication driver as the one installed on the GOT for each communication interface.
For details on [Communication setting] of GT Designer2, refer to the following manual.
GT Designer2 Version
1 Communication settings
1 Set "1" to the channel No. used.
2 Set the following to the driver.
• When connecting to an A/QnA/QCPU or a motion controller: A/QnA/QCPU, QJ71C24, MELDAS C6*
• When connecting to a FXCPU: MELSEC-FX
3 Perform the detailed settings for the driver. (
4
Screen Design Manual
Communication detail settings)
3.3 Preparatory Procedure for Monitoring
3.3.3 Setting communication interface (Communication settings)
1
2
3
4
5
6
7
8
3 - 23