Clear Flowlimit Notification Interval - Enterasys N Standalone (NSA) Series Configuration Manual

14.3.15.12 clear flowlimit notification interval

Use this command to reset the SNMP flow limit notification interval to the default value of 120
seconds.
clear flowlimit notification interval
Syntax Description
None.
Command Type
Switch command.
Command Mode
Read-Write.
Command Defaults
None.
Example
This example shows how to reset the SNMP flow limit notification interval:
Matrix(rw)->clear flowlimit notification interval
Security Configuration Command Set
Configuring Flow Setup Throttling (FST)
Matrix NSA Series Configuration Guide 14-205