Clear Flowlimit Stats - Enterasys N Standalone (NSA) Series Configuration Manual

Security Configuration Command Set
Configuring Flow Setup Throttling (FST)

14.3.15.13 clear flowlimit stats

Use this command to reset flow limiting statistics back to default values on one or more port(s).
clear flowlimit stats [port-string]
Syntax Description
port-string
Command Type
Switch command.
Command Mode
Read-Write.
Command Defaults
If port-string is not specified, statistics will be reset on all ports.
Example
This example shows how to reset flow limiting statistics back to default values on Fast Ethernet port
5 in port group 1:
Matrix(rw)->clear flowlimit stats fe.1.5
14-206 Matrix NSA Series Configuration Guide
(Optional) Resets flow limiting statistics on specific port(s).