Delta ASD-A2 Series User Manual page 455

Chapter 8 Parameters
P5-87 PLED
Operational
Interface：
Default： 0
Control
Mode：
Range： -1073741824 ~ +1073741823
Data Size： 32-bit
Format： Decimal
Settings： When the engaging condition (P5-88.Z) of E-cam is satisfied, the pulse
P5-88■ ECON E-CAM: Activate E-Cam Control
Operational
Interface：
Default： 00000000h
Control
Mode：
Unit： -
Range： 0 ~ 0x203FF257
Size：
Format： Hexadecimal
8-204
E-CAM: Lead Pulse
Panel / Software
PR
Unit： -
number from the master has to exceed the setting value of this
parameter, so that E-cam is fully engaged.
In other words, E-cam engages after neglecting the lead pulse
specified by this parameter.
If the symbol of this parameter is +, it means the received forward pulse
is regarded as the lead pulse.
If the symbol of this parameter is - , it means the received reverse
pulse is regarded as the lead pulse.
NOTE
Panel / Software
PR
Data
32-bit
Communication
A2L does not support E-Cam function.
Communication
ASDA-A2
Address: 05AEH
05AFH
Related Section:
7.11
Address: 05B0H
05B1H
Related Section:
7.11
Revision February, 2017