Delta ASD-A2 Series User Manual page 405

Chapter 8 Parameters
P4-12 SOF2
Operational
Interface：
Default： Factory default
Control
Mode：
Range： 0 ~ 32767
Data Size： 16-bit
Format： Decimal
Settings： Manually adjust the hardware offset. The adjustment function needs to
P4-13 TOF1
Operational
Interface：
Default： Factory default
Control
Mode：
Range： 0 ~ 32767
Data Size： 16-bit
Format： Decimal
Settings： Manually adjust the hardware offset. The adjustment function needs to
8-154
Analog Speed Input Offset Adjustment 2
Panel / Software
ALL
Unit： -
be enabled by the setting of parameter P2-08. It is not suggested to
adjust the auxiliary adjustment. This parameter cannot be reset.
Analog Torque Input Offset Adjustment 1
Panel / Software
ALL
Unit： -
be enabled by the setting of parameter P2-08. It is not suggested to
adjust the auxiliary adjustment. This parameter cannot be reset.
Communication
Communication
ASDA-A2
Address: 0418H
0419H
Related Section: -
Address: 041AH
041BH
Related Section: -
Revision February, 2017