Delta ASD-A2 Series User Manual page 380

ASDA-A2
P2-71■ CAP
Operational
Interface：
Default： 0x0
Control
Mode：
Range： 0x0 ~ 0x1
Data Size： 16-bit
Format： Hexadecimal
Settings： When P2-71 is set to 1, the current position will be set as home position.
P2-72 Reserved
P2-73 ALOP E-Cam Alignment - Operation Setting
Operational
Interface：
Default： 0x00000000
Control
Mode：
Range： 0x00000000 ~ 0x5F3F6F5F
Data Size： 32-bit format = DCBA : UZYX
Format： Hexadecimal
Settings：(This function is available in firmware version V1.038 sub26 and later
Revision February, 2017
Absolute Position Homing
Panel / Software
ALL
Unit： N/A
This function is the same as the digital input, ABSC. This function can
be enabled only when parameter P2-08 is set to 271.
Panel / Software
PR
Unit： N/A
models)
YX: Range of filter (0 ~ 95%)
UZ: Max. allowable correction rate (0 ~ 100%)
BA: PR number (0 ~ 63)
DC: Masking range setting (0 ~ 95%)
YX: Range of filter (%)
When digital input, ALGN is triggered, E-Cam alignment function is
enabled. The system will detect the current E-Cam position. When
the error between current E-Cam position and the last alignment
position is less than this setting range (%), filter function is enabled
Communication
Communication
Chapter 8 Parameters
Address: 028EH
028FH
Related Section: N/A
Address: 0292H
0293H
Related Section: N/A
8-129