Delta ASD-A2 Series User Manual page 397

Chapter 8 Parameters
8-146
P1-47
P1-49
P1-38
Home offset
P1-44
P1-45
DMCNET mode:
Related variables
during initialization
P1-32
P2-35
P1-47
P1-49
P1-38
Home offset
Acc
Dec
P1-44
P1-45
Methods that save parameters in EEPROM (even when the power is
off):
SDO: When setting parmeters, parameters will be stored in EEPROM.
PDO: Please refer to the setting of P3-11.X
X = 1: When setting parameters via PDO, parameters will be stored in
EEPROM.
X = 0: When setting parameters via PDO, parameters will not be stored
in EEPROM.
Note: In CANopen mode, when using the funciton of OD 1010 Store
Parameter and P3-12.Z = 0, the default value will be different from the value
that showed above. Please refer to CANopen Standard for further information.
10 EEPROM
0 EEPROM
100 EEPROM
0 EEPROM
1
EEPROM
1
EEPROM
P3-12.Z = 0 P3-12.Z = 1
0x0010 EEPROM
3840000 EEPROM
100 EEPROM
0 EEPROM
100 EEPROM
0 Undefined
200 Undefined
200 Undefined
1 EEPROM
1 EEPROM
ASDA-A2
Used in HM
mode
Note
Used in HM
mode
Used in PV, PP
mode
Used in PV, PP
mode
Revision February, 2017