Delta ASD-A2 Series User Manual page 452

ASDA-A2
P5-81 ECHD E-CAM: Start Address of Data Array
Operational
Interface：
Default： 100
Control
Mode：
Range： 0 ~ (800－P5-82)
Data Size： 16-bit
Format： Decimal
Settings： The first data of E-Cam table is saved in the address of data array.
NOTE
P5-82 ECMN E-CAM: Area Number N (at least >=5)
Operational
Interface：
Default： 5
Control
Mode：
Range： 5 ~ 720, must < = (P5-10－P5-81)
Data Size： 16-bit
Format： Decimal
Settings： It means the E-Cam curve is divided into N area, and the table should
NOTE
Revision February, 2017
Panel / Software
PR
Unit： -
1. Version V1.015 (before): This parameter cannot be modified when
E-Cam is activated (P5-88, X = 1).
2. Version V1.015 (included or after): This parameter can be set
anytime, but will be effective only when pre-engaged → engaged.
3. A2L does not support this function.
Panel / Software
PR
Unit： -
And P5-82 x P5-84 ＜＝ 2147483647
include N+1 data.
1. This parameter can be wrote when E-Cam stops (Please refer
toP5-88, X=0).
2. A2L does not support E-Cam function.
Communication
Communication
Chapter 8 Parameters
Address: 05A2H
05A3H
Related Section:
7.11
Address: 05A4H
05A5H
Related Section:
7.11
8-201