Delta ASD-A2 Series User Manual page 403

Chapter 8 Parameters
PKEY Input Status of the Drive Keypad (Read-only)
P4-08★
Operational
Interface：
Default： -
Control
Mode：
Range： (read-only)
Data Size： 16-bit
Format： Hexadecimal
Settings： The aim is to check if the five Keys, MODE, UP, DOWN, SHIFT and
MOT
P4-09★
Operational
Interface：
Default： -
Control
Mode：
Range： 0 ~ 0x1F
Data Size： 16-bit
Format： Hexadecimal
Settings： Note: There is no difference whether read by panel or communication.
P4-10■ CEN
Operational
Interface：
Default： 0
Control
Mode：
8-152
Panel / Software
ALL
Unit： -
SET can work normally. This parameter is also used to check if the
Keys are all functional when producing servo drives.
Digital Output Status (Read-only)
Panel / Software
ALL
Unit： -
Adjustment Selection
Panel / Software
ALL
Unit： -
Communication
Communication
Communication
ASDA-A2
Address: 0410H
0411H
Related Section: -
Address: 0412H
0413H
Related Section:
4.4.5
Address: 0414H
0415H
Related Section: -
Revision February, 2017