Delta ASD-A2 Series User Manual page 313

Chapter 8 Parameters
P1-25 VSF1
Operational
Interface：
Default： 1000
Control
Mode：
Range： 10 ~ 1000
Data Size： 16-bit
Format： Decimal
Example： 150= 15 Hz
Settings： The setting value of the first low-frequency vibration suppression. If P1-
P1-26 VSG1
Operational
Interface：
Default： 0
Control
Mode：
Range： 0 ~ 9 (0: Disable the first low-frequency filter)
Data Size： 16-bit
Format： Decimal
Settings： The first low-frequency vibration suppression gain. The bigger value it
8-62
Low-frequency Vibration Suppression (1)
Panel / Software
PT / PR
Unit： 0.1 Hz
26 is set to 0, then it will disable the first low-frequency filter.
Low-frequency Vibration Suppression Gain
(1)
Panel / Software
PT / PR
Unit： -
is, the better the position response will be. However, if the value is set
too big, the motor will not be able to smoothly operate. It is suggested
to set the value to 1.
Communication
Communication
ASDA-A2
Address: 0132H
0133H
Related Section:
6.2.9
Address: 0134H
0135H
Related Section:
6.2.9
Revision February, 2017