Delta ASD-A2 Series User Manual page 428

ASDA-A2
P5-36 CAST CAPTURE - Start Address of Data Array
Operational
Interface：
Default： 0
Control
Mode：
Range： 0 ~ (value set by P5-10 minus 1)
Data Size： 16-bit
Format： Decimal
Settings： The first data CAPTURE obtained should be saved in the address of
NOTE
P5-37■ CAAX CAPTURE－Axis Position CNT
Operational
Interface：
Default： 0
Control
Mode：
Range： -2147483648 ~ +2147483647
Data Size： 32-bit
Format： Decimal
Settings： Shows the axis position of CAPTURE pulse source
NOTE
Revision February, 2017
Panel / Software
ALL
Unit： -
data array.
It is writable only when COMPARE stops (please refer to P5-39)
Panel / Software
ALL
Unit： -
1）It is writable only when COMPARE stops (please refer to P5-39)
2）If the source is the main encoder, this parameter is write-protected
and the content is the feedback position of the motor (monitoring
variable 00h).
Communication
Communication
Chapter 8 Parameters
Address: 0548H
0549H
Related Section:
7.11.1
Address: 054AH
054BH
Related Section:
7.11.1
8-177