Delta ASD-A2 Series User Manual page 406

ASDA-A2
P4-14 TOF2
Operational
Interface：
Default： Factory default
Control
Mode：
Range： 0 ~ 32767
Data Size： 16-bit
Format： Decimal
Settings： Manually adjust the hardware offset. The adjustment function needs to
P4-15 COF1
Operational
Interface：
Default： Factory default
Control
Mode：
Range： 0 ~ 32767
Data Size： 16-bit
Format： Decimal
Settings： Manually adjust the hardware offset. The adjustment function needs to
Revision February, 2017
Analog Torque Input Offset Adjustment 2
Panel / Software
ALL
Unit： -
be enabled by the setting of parameter P2-08. It is not suggested to
adjust the auxiliary adjustment. This parameter cannot be reset.
Current Detector (V1 Phase) Offset
Adjustment
Panel / Software
ALL
Unit： -
be enabled by the setting of parameter P2-08. It is not suggested to
adjust the auxiliary adjustment. This parameter cannot be reset.
Communication
Communication
Chapter 8 Parameters
Address: 041CH
041DH
Related Section: -
Address: 041EH
041FH
Related Section: -
8-155