Delta ASD-A2 Series User Manual page 360

ASDA-A2
Settings：
P2-34 SDEV The Condition of Overspeed Warning
Operational
Interface：
Default： 5000
Control
Mode：
Range： 1 ~ 5000
Data Size： 16-bit
Format： Decimal
Settings： The setting of over speed warning in servo drive error display (P0-01)
P2-35 PDEV
Operational
Interface：
Default： 3840000
Control
Mode：
Range： 1 ~ 128000000
Data Size： 32-bit
Format： Decimal
Revision February, 2017
 Semi-auto Setting:
1: It means the inertia estimation in semi-auto mode is completed.
The inertia value can be accessed via P1-37.
0: 1. When the display is 0, it means the inertia adjustment is not
completed and is adjusting.
2. When the setting is 0, it means the inertia adjustment is not
completed and is adjusting.
Panel / Software
S
Unit： r/min
Condition of Excessive Position Control
Deviation Warning
Panel / Software
PT／PR
Unit： pulse
Semi-auto setting
Reserved
Not in use
Communication
Communication
Chapter 8 Parameters
Address: 0244H
0245H
Related Section: -
Address: 0246H
0247H
Related Section: -
8-109