Delta ASD-A2 Series User Manual page 335

Chapter 8 Parameters
Range： 1 ~ 1000
Data Size： 16-bit
Format： Decimal
Settings： The smooth constant of analog position command is only effective to
P1-66 PCM
Operational
Interface：
Default： 1.0
Control Mode： PT
Data Size： 16-bit
Format： One decimal
Example： 1.5 = 1.5 cycles
Settings： It is the rotation number setting when analog speed command
P1-67 Reserved
P1-68 PFLT2 Position Command Moving Filter
Operational
Interface：
Default： 4
Control
Mode：
Range： 0 ~ 100
8-84
analog position command.
Max. Rotation Number of Analog Position
Command
Panel / Software
Unit： 1 cycle
Range： 0.0 ~ 200.0
inputs the max. voltage (10V). If it is set to 30 and the external
voltage inputs 10V, it means the position command is +3 cycles. 5V
means the speed control command is 1.5 cycles.
-10V means the position command is -3 cycles.
Position control command = Input voltage value x Setting value／10
It will be available after firmware version v1.031 sub8.
NOTE
Panel / Software
PT／PR
Unit： ms
Communication
10
0.1 cycle
0 ~ 2000
DEC
15 = 1.5 cycles
Communication
ASDA-A2
Address: 0184H
0185H
Related Section: -
Address: 0188H
0189H
Related Section: -
Revision February, 2017