Delta ASD-A2 Series User Manual page 407

Chapter 8 Parameters
P4-16 COF2
Operational
Interface：
Default： Factory default
Control
Mode：
Range： 0 ~ 32767
Data Size： 16-bit
Format： Decimal
Settings： Manually adjust the hardware offset. The adjustment function needs to
P4-17 COF3
Operational
Interface：
Default： Factory default
Control
Mode：
Range： 0 ~ 32767
Data Size： 16-bit
Format： Decimal
Settings： Manually adjust the hardware offset. The adjustment function needs to
8-156
Current Detector (V2 Phase) Offset
Adjustment
Panel / Software
ALL
Unit： -
be enabled by the setting of parameter P2-08. It is not suggested to
adjust the auxiliary adjustment. This parameter cannot be reset.
Current Detector (W1 Phase) Offset
Adjustment
Panel / Software
ALL
Unit： -
be enabled by the setting of parameter P2-08. It is not suggested to
adjust the auxiliary adjustment. This parameter cannot be reset.
Communication
Communication
ASDA-A2
Address: 0420H
0421H
Related Section: -
Address: 0422H
0423H
Related Section: -
Revision February, 2017