Delta ASD-A2 Series User Manual page 395

Chapter 8 Parameters
P3-11 CANOP CANopen / DMCNET Selection
Operational
Interface：
Default： 0x0000
Control
Mode：
Range： Shown as below
Data Size： 16-bit
Format： Hexadecimal
Settings： Synchronous / DMCNET setting of CANopen is divided into X, Y, Z and
NOTE
P3-12 QSTPO CANopen / DMCNET Support Setting
Operational
Interface：
Default： 0x0000
Control
Mode：
Range： 0x0000 ~ 0x0111
Data Size： 16-bit
Format： Hexadecimal
8-144
Panel / Software
CANopen / DMCNET
Unit： -
U (hexadecimal):
Item
Function Undefined
Range
The definition is as follows:
X = 1: When writing parameters via PDO, parameters will be saved in
EEPROM.
X = 0: When writing parameters via PDO, parameters will not be saved
in EEPROM.
Y, Z, U : Undefined
If X is set to 1 and write parameters by PDO continuously, it will
shorten the lifetime of EEPROM.
Panel / Software
CANopen / DMCNET
Unit： -
Communication
U Z
Undefined
-0 ~ 1 0 ~ F
Communication
Address: 0316H
Related Section:
Section 9.2
Y X
Whether the
Undefined parameter is saved
into EEPROM
0 ~ F 0 ~ 1
Address: 0318H
Related Section:
Section 9.2
Revision February, 2017
ASDA-A2
0317H
0319H