Configuration File Management - 3Com 3032 Configuration Manual

Configuration File
Management
Content and Format of
the Configuration File
Download
Configuration File
After the
display version
displays:
card name Driver need to be updated
On-line upgrading uses the upgrading program of other cards and this card will
not be upgraded on-line. The Console displays the following prompt information:
%Error: File ID error!
If the on-line upgrading file is damaged, the card cannot be upgraded on-line. The
Console displays the following prompt information:
%Error: File CRC error
If another user on the same card is using the on-line upgrading command input,
this user cannot execute the command. The Console displays the following
prompt information:
The indicated board is at updating status
This section contains information on configuration file management.
The configuration file is a text file, with the following format:
Saved in command format.
To save space, only the parameters are saved but the defaults are not saved
(Please refer to the following chapters for the default values of configuration
parameters.).
Commands are organized by views. Commands in the same view are organized
together, forming a section, and sections are separated with a blank line or a
comment line (beginning with "!").
Sections are usually arranged in the following order: global configuration,
physical interface configuration, logical interface configuration, route protocol
configuration, etc.
Ended with "return".
You can edit the configuration files offline following the specified format and then
load them onto the router. Three methods are available for loading configuration
files, which are:
XModem approach
TFTP approach
FTP approach
XModem Approach
With this approach, configuration files can be loaded using the
command in the terminal emulation program after booting the router. This
command can only be executed in the terminal emulation program. If executing
the command in Telnet, the following prompt will be displayed:
Download can only be executed by the serial terminal client.
Perform the following command in system view.

Configuration File Management

command is used, the information on the slot
!
47
download config