Connecting Dut; Executing Measurement - Agilent Technologies ENA Series User Manual

Measurement Examples
Evaluating transmission characteristics of a front end module
NOTE Because the test port assignment setting for channels 1 and 2 and that for channels 3 and 4
are the same, you need not to change the connection of ECal.

9. Connecting DUT

Connect the DUT as shown in Figure 14-37.
Figure 14-37 Connecting 6-port front end module

10. Executing measurement

Step 1. Display the trigger menu.
Description of setting
Display the trigger menu.
324
Key stroke
Chapter 14