Service Equipment You Will Need
There are certain things that will be required to troubleshoot, adjust, and test the
N9039A RF Preselector. They include the following:
• Calibration Application Software
• RF Type-M Troubleshooting Cables
• USB Keyboard and Mouse
• USB Storage Device
• Test Equipment
Calibration Application Software
Information regarding the Agilent N7817A RF Preselector Calibration Application
Software can be found at the following web site:
www.agilent.com/find/calibrationsoftware
RF Type-M Troubleshooting Cables
The RF Type-M troubleshooting cables are required to verify the RF signal paths
to the Input and Filter Boards.
Agilent Part
Cable, BNC (m) to M-Type (m)
Adapter, BNC (f) to BNC (f)
USB Keyboard and Mouse
A USB keyboard and mouse will be needed to accomplish many of the different
troubleshooting tasks, as well as updating the instrument software. Any standard
USB keyboard and mouse should work.
USB Storage Device
The main reason why a USB storage device will be needed is to backup calibration
data when the disk drive in an instrument needs to be replaced. Most any size of
storage device can be used, as the size of the file to be backed up is approximately
10 Mega bytes.
Chapter 1
Service Equipment You Will Need
Agilent Part
Recommended
Number
Quantity
N9039-60034
1250-0080
Overview
2
1
23