Agilent Support, Services, And Assistance; Service And Support Options; Calibration Options - Agilent Technologies FieldFox N9923AN Service Manual

RF Vector Network Analyzer
N9923AN

Agilent Support, Services, and Assistance

Information on the following topics is included in this section.
•

"Service and Support Options"

•

"Calibration Options"

• "Contacting Agilent"
• "Shipping Your Analyzer to Agilent for Service or Repair"
Service and Support Options
The analyzer's standard warranty is a one-year return to Agilent Technologies service
warranty.
There are other repair and calibration options available from Agilent
NOTE
Technologies. Contact Agilent for additional information on available service
agreements for this product. Refer to
Calibration Options
The calibration options listed below are supported by Agilent Technologies. The
calibrations may be performed by Agilent Technologies or a qualified customer may
perform the calibrations. See
Commercial Calibration Certificate with Test Data
A complete set of measurements that test the analyzer to the manufacturer's published
specifications. It includes a calibration label, a calibration certificate, and the
corresponding calibration data report. This calibration conforms to ISO 9001.
ISO 17025 Standards Compliant Calibration
A complete set of measurements that test the analyzer to the manufacturer's published
specifications. It includes a calibration label, an ISO 17025 calibration certificate, and the
corresponding calibration data, measurement uncertainties, and guardbands on all
customer specifications. This calibration conforms to ISO 17025 and ISO 9001.
This calibration option is available at the time of purchase or can be obtained later by
sending your analyzer to Agilent for calibration. Refer to
Agilent for Service or
ANSI Z540 Standards Compliant Calibration
A complete set of measurements that test the analyzer to the manufacturer's published
specifications. It includes both pre- and post-adjustment data with measurement
uncertainty information compliant to the ANSI/NCSL Z540 standard.
This calibration option is available at the time of purchase or can be obtained later by
sending your analyzer to Agilent for calibration. Refer to
Agilent for Service or
Service Guide N9923-90005
Chapter 3 for details on testing the N9923AN.
Repair".
Repair".
General Product Information
Agilent Support, Services, and Assistance
"Contacting Agilent" on page
"Shipping Your Analyzer to
"Shipping Your Analyzer to
2-6.
2-5