Open Calibration With Pi Test Fixture (Open Cal); Required Equipment; Procedure; Setup For Open Calibration With Pi-Network Test Fixture - Agilent Technologies E4915A Service Manual

8. Open Calibration with PI Test Fixture (OPEN CAL)

Required Equipment

PI-Network Test Fixture
BNC(m)-BNC(m) Cable, 30 cm

Procedure

1. Connect the equipment as shown in Figure 2-10.
Figure 2-10. Setup for Open Calibration with PI-Network Test Fixture
2. Select \OPEN CAL" and click
3. Following the program instructions, complete the procedure.
41900A
PN 8120-1838, 2 ea
NNNNNNNN
OK in the list box of the program display.
Adjustments and Performance Tests 2-17