Configuring The Network - Agilent Technologies ENA Series User Manual

Configuring the Network

This section describes how to make the settings required to connect the E5070A/E5071A
to a LAN (local area network). For details of how to use a LAN, see the Programmer's
Guide.
NOTE
When connecting the E5070A/E5071A to a LAN, consult the network administrator about
the proper LAN settings.
Configuring the Network
Step 1. Use the LAN cable to connect the E5070A/E5071A to the LAN.
Step 2. Press
Step 3. Press
Step 4. Press
Step 5. Press
Step 6. The Network dialog box (Figure 12-8) will appear. In the
(display it in reverse video) and press the
Figure 12-8 Network Dialog Box ("Configuration" Tab)
Chapter 12
Setting and Using the Control and Management Functions
.
.
Misc Setup
.
Network Setup
.
Network Configuration
Configuring the Network
Configuration
button.
Properties
tab, select
TCP/IP
255