Engine Assembly
E n g i n e i n s t a l l a t i o n ( c o n t ' d )
34. Install the connector bracket t o the front cylinder
head.
1 0 x 1 . 2 5 m m
2 2 N m (2.2 k g f m , 16 Ibf-ft)
35. Install the harness clamp bracket to the rear
cylinder head.
8 x 1.25 m m
22 N m (2.2 k g f m , 16 Ibf-ft)
36. A l i g n the reference mark (A) on the steering joint
and steering gearbox pinion shaft. Connect the
steering joint (B) to the steering gearbox pinion
shaft (C). Tighten the steering joint bolt.
37. Install the steering joint cover (D).
38. Install the A/C compressor.
8 x 1.25 m m
22 N m
(2.2 k g f m ,
16 Ibf-ft)
39. Install the A/C compressor belt (see page 21-100).
5-16