Ignition System
Ignition Coil Removal/Installation
1. Remove the intake m a n i f o l d cover.
3. Disconnect the ignition coil connectors (A), then
remove the front bank ignition coils (B).
B
4. Disconnect the ignition coil connectors (A), then
remove the rear bank ignition coils (B).
6 x 1.0 m m
1 2 N - m ( 1 . 2 k g f m , 8 . 7 Ibf-ft)
5. Install the ignition coils in the reverse order of
removal.
4-22