Honda ACCORD HYBRID 2005 Service Manual page 91

6. Loosely install both of the new m i d - m o u n t
m o u n t i n g bolts.
1 2 x 1 . 2 5 m m Replace.
44 N m (4.5 k g f m , 33 Ibf-ft)
Replace.
7. A l i g n the reference marks (A) w i t h edge (B) of both
rear stiffeners (C), and tighten the rear subframe
m o u n t i n g bolts, then front b o l t s / a n d tighten the
stiffener bolts to the specified torque.
C
8. Tighten the m i d - m o u n t m o u n t i n g bolts.
9. Remove the jack and front subframe adapter.
10. Lower the vehicle on the hoist, then remove the
engine hanger and engine balancer bar.
11. Raise the vehicle on the hoist to full height.
12. Tighten the bolt securing the transmission lower
mount.
13. Lower the vehicle on the hoist.
14. Install the shift cable bracket (A), then install the
harness clamp (B).
(cont'd)
5-13